Infrared Temperature sensors
Infrared sensors are well suitable for applications where measurement without touch is necessary.
Uwe electronic offers within the scope of an extensive product portfolio temperature sensors and very compact sensors by which electronics are inside connection cable. For measurements of reflecting bodies like metals the high frequent sensors (with 2.3 µm wave length) are used.
The infrared temperature sensors and measuring instruments are suited for particularly hot surfaces, moving or hardly accessible parts. Further applications are sensitive objects which could be destroyed by touching or be dirtied.
Temperature measurement with Infrared temperature sensors can done very fast.
IR-Temperature sensor
The easy entry into the non-contact temperature measurement:
Smart, safe and fast from -50 to 1030 °C
Datasheet CS LT15
In stock! CS LT15-SF incl. Software Item no. #25292
€ 125,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
- Temperature range: -50°C to 1030°C
- Response time: 25 ms
- Optical Resolution 15:1
- Green LED alarm indication, aiming support, selfdiagnostic or temperature code indication
- Usable up to 80°C ambient temperature without cooling
- Several outputs: 0-10V or 0-5V free scalable, thermocouple type K, alarmoutput or digital output
- USB programming interface, direct serial 9.6 kBaud interface
- Power supply: 5-30V DC
- Measurement of moving or not access able parts
- Very hot surfaces
- Where contact does destroy, pollute or temperature changes
- Very fast measurement
- Non-metallic surface
- Plastic plates in thermoforming machines
- Laminating of decor and chip boards
- Measurement of asphalt in street construction
- Drying of paper in printing machines
Compact IR-Temperature sensor Csmicro Series
Very small infrared thermometer for - 50 °C to 1030 °C ideal for non-contact temperature measurement in limited space conditions
Datasheet CSM LT_LT hot
CSM LT15-SF incl. Software – Item no. #25280
€ 225,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
Datasheet CSM LT HS (Sensitive)
Datasheet CSM 2M (Metal)
Datasheet CSM 3M (Metal)
CSM 3ML-SF incl. Software – Item no. #25299
€ 515,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
Operating manual CSM
Low cost micro size infrared thermometer
- Non-metals -50°C to 1030°C CSM LT
- Ambient temperature 180°C for non-metals: CSM LT hot
- Sensitivity up to 0.025°C for non-metals: CSM LT HS
- Metals for high temperatures: CSM 2M
- Measure metals from 50°C: CSM 3M
- Measurement of moving or not access able parts
- Very hot surfaces
- Where contact does destroy, pollute or temperature changes
- Very fast measurement
- Non-metallic surface (LT-version)
- metallic surface (2M/3M-version)
- Plastic plates in thermoforming machines
- Laminating of decor and chip boards
- Drying in food-process
- Measurement of asphalt in street construction
- Drying of paper in printing machines
IR-Temperature sensor CT LT Series for non metals
In stock! CT LT15-SF – Item no. #25382
€ 280,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
Datasheet CT LT-ex
Datasheet CT LT fast
Datasheet CT LT hot
Datasheet CT-Laser LT
CT-Laser LT-SF – Item no. #25393
€ 690,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
Operating manual CT
Plastic brochure CT
Precise non-contact temperature measurement of metal from –50 °C up to 975 °C
Features:- Small infrared sensor with 8-14 μm wave length for measuring of non-metals
- Small sensor head of 14mm diameter and 28mm length for installing in constricted rooms and ambient air till 180°C (250°C- CHT hot)
- Measurement from –50 °C up to 975 °C and measurement frequency till 1ms
- Measurement of moving or not access able parts
- Very hot surfaces
- Where contact does destroy, pollute or temperature changes
- Very fast measurement
- Non-metallic surface (LT-version)
- Plastic plates in thermoforming machines
- Laminating of decor and chip boards
- Drying in food-process
- Measurement of asphalt in street construction
- Drying of paper in printing machines
IR-Temperature sensor CT series for metals, glasses and foils
Datasheet 1M 2M Metal
Datasheet CT 3M Metal low temp
In stock! CT 3ML-SF – Item no. #25423
€ 575,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
Datasheet CT Laser 3M Metal
CT-Laser 3ML-SF – Item no. #25424
€ 875,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
Datasheet CT 4M High speed
Datasheet CT G5 Glas
Datashhet CT P3 Foils
Datasheet CT P7 Foils
Operating manual CT
Glas brochure CT
Application metal industry
- Small infrared sensor with 2,3μm wave length for measuring of metals >50°C
- Small sensor head of 14mm diameter and 28mm length for installing in constricted rooms and ambient air till 125°C without active cooling
- Measurement from 50°C up to 2.200°C and measurement frequency till 1ms
- Short wave length decrease measurement failures due to wrong or unknown emission grade
- Special sensors for glass and foils
- Measurement of moving or not access able parts
- Very hot surfaces
- Where contact does destroy, pollute or temperature changes
- Very fast measurement
- Metallic surfaces 485°C to 2.200°C: CT 1M 2M
- Metallic surfaces from 50°C: CT 3M
- Metal measurement with laser marking CT Laser 3M
- High-speed measurement of metal oxides: CT 4M
- Measurement of glass: CT G5
- Measurement of thin foils PE, PP and PS: CT P3
- Measurement of foils: PET, PU, PTFE, PA: CT P7
Mechanical and optical Accessories
In order to extend the functionality and application possibilities of the IR sensors, extensive accessories are available to our customers.
Mounting bracket, adjustable in one axis
(M12x1 sensing head, massive housing,
2-hole for M12x1)
Mounting bracket
adjustable in 2 axis
Mounting bolt for M12x1 sensing head
adjustable in one axis
Mounting fork
adjustable in 2 axis
CF ancillary lens or protective window
for M12x1 sensing head
CF ancillary lens or protective window
for air purge collar (laminar) or massive housing
Air purge collar
for M12x1 sensing head
Air purge collar laminar
for M12x1 sensing head
Laser - marker for
centering of IR-sensors
For each infrared temperature measuring device we offer the issuance of a factory test certificate for a small fee.
The factory test certificate is sent with the order together with the device and certifies the precise measuring accuracy of the IR sensor or the thermal imaging camera on the basis of three different values within the temperature measuring range.
Important: The factory test certificate must be issued when the sensor is ordered!
Digital Interface USB-Kit
The real time software Compact Connect allows simple and fast parameterization of the fixed infrared thermometers for the compact and high performance series for documentation of the temperature data. The following applications are available:
- No limitation in licensing.
- Customer specific software adjustments.
- Complete device parameterization.
- Temperature display and recording.
- Automatic process control.
- Temperature data analysis and documentation.
The software Compact Connect is compatible with all netbooks, notebooks and PC systems via Windows XP, Windows Vista and Windows 7.
Part numbers for Software/USB-KIT:
Software for CS LT & CSM: ACCSMIAC- Art.nr. #25296
Software for CT & CT Laser: In stock! ACCTIAG- Art.nr. #25310
€ 65,- + VAT & shipping cost This email address is being protected from spambots. You need JavaScript enabled to view it.
